第1篇 qa工程師崗位職責
qa engineer 質量保證工程師 庫爾茲壓燙科技(合肥)有限公司 庫爾茲壓燙科技(合肥)有限公司,庫爾茲壓燙 main tasks:
- complaint handling of bap products (mainly automotive)
- communication with customers and sales departments for technical issues (foil properties, process issues)
- internal communication with related departments (production, planning, customer service, etc.)
- quality assurance (qa): solving daily issues regarding optical and workability issues of bap products
responsibilities and task details:
- understanding the foil production process of bap products
- supporting and coordination of quality issues for bap products
- self-organization and using 5s disciplines in quality field
- evaluation of defect parts in the field of imd and insert molding
- implementing efficient work flows for the daily quality procedures
- communication with related departments about quality issues
- continues improvement of quality and process parameters
- discuss with colleagues in chinese and english language
qualification:
- need to communicate in english (write and speak)
- independent working attitude and communication
- engineer or scientific university degree (or background in qa / imd field)
- curiosity in learning and understanding new processes
第2篇 qa電子工程師崗位職責
lt;ul style='list-style-type: disc' class=' list-paddingleft-2'gt;lt;ligt;lt;p style='text-indent: -18pt; margin: 0cm 0cm 0pt 49.5pt; mso-list: l0 level1 lfo1' class='msolistparagraph'gt;lt;font color='#000000'gt;lt;span style='mso-fareast-font-family: calibri; mso-bidi-font-family: calibri' lang='en-us'gt;lt;span style='mso-list: ignore'gt;lt;font size='3' face='calibri'gt;1.lt;/fontgt;lt;span style='font: 7pt amp;#39;times new romanamp;#39;'gt;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp; lt;/spangt;lt;/spangt;lt;/spangt;lt;font size='3'gt;lt;span style='font-family: simsun; mso-ascii-font-family: 宋體; mso-hansi-font-family: 宋體' lang='zh-cn'gt;相關工作經驗lt;/spangt;lt;span lang='en-us'gt;lt;font face='calibri'gt;3lt;/fontgt;lt;/spangt;lt;span style='font-family: simsun; mso-ascii-font-family: 宋體; mso-hansi-font-family: 宋體' lang='zh-cn'gt;年以上,電子?？埔陨衔幕潭?英文良好,熟悉lt;/spangt;lt;span lang='en-us'gt;lt;font face='calibri'gt;iso9001lt;/fontgt;lt;/spangt;lt;span style='font-family: simsun; mso-ascii-font-family: 宋體; mso-hansi-font-family: 宋體' lang='zh-cn'gt;品質系統運作。lt;/spangt;lt;/fontgt;lt;/fontgt;lt;/pgt;lt;/ligt;lt;ligt;lt;p style='text-indent: -18pt; margin: 0cm 0cm 0pt 49.5pt; mso-list: l0 level1 lfo1' class='msolistparagraph'gt;lt;font color='#000000'gt;lt;span style='mso-fareast-font-family: calibri; mso-bidi-font-family: calibri' lang='en-us'gt;lt;span style='mso-list: ignore'gt;lt;font size='3' face='calibri'gt;2.lt;/fontgt;lt;span style='font: 7pt amp;#39;times new romanamp;#39;'gt;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp; lt;/spangt;lt;/spangt;lt;/spangt;lt;span style='font-family: simsun; mso-ascii-font-family: 宋體; mso-hansi-font-family: 宋體' lang='zh-cn'gt;lt;font size='3'gt;熟悉音視頻工作原理并有豐富的實踐經驗。lt;/fontgt;lt;/spangt;lt;/fontgt;lt;/pgt;lt;/ligt;lt;ligt;lt;pgt;lt;span style='font-family: simsun; font-size: 10.5pt; mso-bidi-font-family: simsun; mso-ascii-font-family: 宋體; mso-hansi-font-family: 宋體; mso-ansi-language: en-us; mso-fareast-language: zh-cn; mso-bidi-language: ar-sa' lang='zh-cn'gt;lt;font color='#000000'gt;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp;amp;nbsp; 3.amp;nbsp; 熟悉新產品開發進行測試和綜合評估。lt;/fontgt;lt;/spangt;lt;/pgt;lt;/ligt;lt;/ulgt;
第3篇 qa技術工程師崗位職責
工作職責:
1.負責所有原料、包材等的取樣,及時將樣品提交給實驗室檢測
2.負責取樣計劃的建立及維護,確保按照取樣sop要求進行取樣,并及時完成取樣計劃
3.生產線在線檢查,過程巡檢監控,過程檢驗,半成品,成品檢查, 衛生/gmp監管
4.批記錄審核
5.原材料取樣及包裝材料物理性能檢驗
6.生產車間月度清潔時,按照規定進行設備涂抹擦拭,送交qc檢驗
7.庫存成品的aql檢查
崗位要求:
1.醫藥、衛生、食品等相關專業大專以上學歷。
2.1年以上食品/藥品/化妝品相關行業生產或者qa工作經驗。
3.有強烈的工作責任心和良好的工作態度,良好的團隊合作精神
4.熟悉gmp管理,熟悉食品或藥品質量控制體系
5.熟練使用office軟件
第4篇 qa/qc工程師崗位職責內容
公司is09001體系的推進、維護和提高,設計、采購、制造、檢驗等環節質量的控制,優化質量管理控制流程,質量問題的處理和技術支持。
第5篇 質量保證工程師sqa崗位職責
1.潛在供應商質量體系的現場評審;
2.新供應商的批準;
3.制定和維護合格供應商名錄;
4.對主要供應商進行質量體系的年度評審;
5.供應商績效表現的定期評審和評級,跟進及關閉相關供應商,改善行動并評估其有效性;
6.對供應商首件樣品或試樣訂單的認證、及現場工藝固化,評估供應商4m變更對產品的影響;
7.確認來料品質問題,對不良的采購物料進行判定,并與供應商溝通來料品質替換方案;
8.監管關于供應商的質量投訴,糾正、預防措施的落實和有效性跟蹤;
9.根據情況對檢查員和供應商培訓我方的進料檢驗規范及工藝標準等;
10.制定供應商發展計劃,并且確保供應商質量體系按計劃持續改善。
資歷要求:
1.大學本科學歷或同等學歷,有機械工程專業背景,和具備較好的機械識圖能力;
2.對iso9001和iso/ts16949品質系統有深刻認識;
3.見下文
4.能使用常用的檢測工具,如游標卡尺、千分尺、高度表和工顯等;
5.熟悉ppap、fmea、spc、msa、apqp五大質量管理工具;
6.溝通及協調能力,團隊合作,書面英語,辦公軟件應用。
招聘匹配:
1.年齡:25歲~40歲;
2.學歷背景:大學本科或同等學歷(全日制&非全日制都可以接受);
3.專業:機械、機電、材料工程、金屬加工;
4.專業知識:機械圖紙的上標注的名稱,如同軸度、倒角、同心圓等;
測量機加工件的工具:游標卡尺、千分尺、高度表和工顯等;
質量管理工具:8d、ppap、fmea、spc、msa、apq;
5.工作經驗:1.5年以上供應商質量管理工作經驗;
2.或2年以上供應商質量管理經驗, 豐富的screw machining的工作經驗優先考慮;;
3.具有現場質量工程師工作背景,2年以上供應商質量管理經驗;
6.熟悉的產品:金屬機加工件;
7.能接受短期出差,主要分布在江浙一帶;
8.匯報對象:sqa主管,35歲
9.內部合作部門:計劃、生產、工藝、質量
專業:機械、機電、材料工程、金屬加工;
專業知識:機械圖紙的上標注的名稱,如同軸度、倒角、同心圓等;
測量機加工件的工具:游標卡尺、千分尺、高度表和工顯等;
質量管理工具:8d、ppap、fmea、spc、msa、apq;
5.工作經驗:1.5年以上供應商質量管理工作經驗;
或2年以上供應商質量管理經驗, 豐富的screw machining的工作經驗優先考慮;;
具有現場質量工程師工作背景,2年以上供應商質量管理經驗;
熟悉的產品:金屬機加工件;
能接受短期出差,主要分布在江浙一帶; 主要職責:
1.潛在供應商質量體系的現場評審;
2.新供應商的批準;
3.制定和維護合格供應商名錄;
4.對主要供應商進行質量體系的年度評審;
5.供應商績效表現的定期評審和評級,跟進及關閉相關供應商,改善行動并評估其有效性;
6.對供應商首件樣品或試樣訂單的認證、及現場工藝固化,評估供應商4m變更對產品的影響;
7.確認來料品質問題,對不良的采購物料進行判定,并與供應商溝通來料品質替換方案;
8.監管關于供應商的質量投訴,糾正、預防措施的落實和有效性跟蹤;
9.根據情況對檢查員和供應商培訓我方的進料檢驗規范及工藝標準等;
10.制定供應商發展計劃,并且確保供應商質量體系按計劃持續改善。
資歷要求:
1.大學本科學歷或同等學歷,有機械工程專業背景,和具備較好的機械識圖能力;
2.對iso9001和iso/ts16949品質系統有深刻認識;
3.見下文
4.能使用常用的檢測工具,如游標卡尺、千分尺、高度表和工顯等;
5.熟悉ppap、fmea、spc、msa、apqp五大質量管理工具;
6.溝通及協調能力,團隊合作,書面英語,辦公軟件應用。
招聘匹配:
1.年齡:25歲~40歲;
2.學歷背景:大學本科或同等學歷(全日制&非全日制都可以接受);
3.專業:機械、機電、材料工程、金屬加工;
4.專業知識:機械圖紙的上標注的名稱,如同軸度、倒角、同心圓等;
測量機加工件的工具:游標卡尺、千分尺、高度表和工顯等;
質量管理工具:8d、ppap、fmea、spc、msa、apq;
5.工作經驗:1.5年以上供應商質量管理工作經驗;
2.或2年以上供應商質量管理經驗, 豐富的screw machining的工作經驗優先考慮;;
3.具有現場質量工程師工作背景,2年以上供應商質量管理經驗;
6.熟悉的產品:金屬機加工件;
7.能接受短期出差,主要分布在江浙一帶;
8.匯報對象:sqa主管,35歲
9.內部合作部門:計劃、生產、工藝、質量
第6篇 中級qa工程師崗位職責
職位描述:
崗位描述:
1、負責公司軟件開發質量保證、軟件質量提升指導工作;
2、制定軟件項目質量保證計劃及過程規范并推動實施;
3、為軟件開發過程規范實施提供咨詢、指導和培訓,并組織開展產品過程審核,跟蹤協調不合格項整改,確保公司規范流程和方法得到落實;
4、組織建立軟件開發與度量標準,收集過程數據、統計分析過程情況并以此推動過程改進工作;
5、參與公司質量體系建設、持續改進及有關質量提升的其它工作。
崗位要求:
1、本科及其以上學歷,計算機或相關專業畢業,具備業務分析能力;
2、2年以上工作經驗,精通敏捷開發模式優先;
3、熟悉質量管理體系相關知識(cmmi或iso9000等),軟件工程理論、軟件測試?yán)碚摵头椒?
4、熟悉項目度量與分析知識、熟悉項目管理方法和管理工具;
5、具有團隊精神,較強的組織協調能力,性格穩重、扎實,有快速吸納新知識的能力;
6、良好的書面和語言表達的溝通能力,具備良好的文檔編寫能力。
第7篇 包裝qa工程師崗位職責
工作職責:
1.負責包裝質量保證和質量保證工作
2.確定產品質量策劃并按計劃實施和完成項目產品質量評價,確保產品評價有效;負責產品的項目研發和生產任務的質量監督;
3.配合工藝驗證工作,把關工藝變更風險識別和評價完整性;
4.識別產品質量隱患和改進機會,并改善實施,保障產品質量風險可控;
5.不斷尋求優化包裝測試質量監控的改善方法,提升質量控制效率;
6.質量數據的收集、統計和分析。
任職資格:
1.本科及以上學歷,包裝/高分子材料/材料等相關專業;3年包裝行業工作經驗,醫療器械包裝工作經驗者優先考慮
2.英語水平良好,有較強的讀寫能力;
3.善于與他人溝通,有良好的服務意識以及較強的應變能力;
4.有較強的團隊合作精神;
5.有責任心,積極進取,謹慎細致,條理性強;
6.熟練使用各種辦公軟件及設備
第8篇 mqa工程師崗位職責
mqa engineer(制程品質工程師-工業連接器/線束方向) 莫仕連接器 莫仕連接器(成都)有限公司,莫仕連接器,莫仕連接器 job responsibilities:
1.monitor quality trend, collection and analysis data, lead and participate in product quality improvement activities.
2.handle customer complain based on the relevant procedure/specification and ensure 8d reports are submit to customer within the specified cycle time. follow up and ensure the preventive/ corrective actions implement well and drive reduction in customer complaints.
3.handle daily process quality issue in time. it includes failure analysis, take containment actions, dispose suspect parts. works with relevant department to take corrective and preventive action to reduce inner complain.
4.participation glss projects to improve quality performance and reduce the copq.
5.introduce appropriate spc tools/methodology and ensure that spc produces are effectively implemented;
6.to play aqp engineer role for spo type new product. create qualification plan, review the qualification reports, create the inspection criteria, conduct failure analysis, prepare / review and submit ppap to customer for approval.
7.establish and update the inspection documents. such as control plan, inspection plan , cosmetic criteria and so on.
8.conducted an effective process audit to preventive customer complaint and find the opportunities for improvement.
9.to take responsibility for qualification of new tooling, fixtures, process, transfer products and changes.
10.support or lead training to qc and technician and engineer for enhancing skill and ability.
11.lead the disposition for block stock to meet the goals.
job requirements:
1. be familiar with the manufacturing process, quality control, and industry standard for industry connector.
2. bachelor degree or equivalent in electronic and mechanical engineering
3. minimum 5 years’ experience as quality engineer in a manufacturing environment
4. good communication skill in engineer;
5. the knowledge of spc, 7qc tools and iso9001/ ts16949;
6. the skill of data analysis;
7. good english writing skill.
第9篇 qa體系工程師崗位職責
崗位職責:
* 組織編寫質量管理體系的有關文件;
* 對質量管理體系文件、記錄的控制情況實施監督和檢查;
* 對質量管理體系策劃的實施效果進行監督檢查;
* 制定管理評審的計劃,收集并提供管理評審所需要的資料,負責對評審后的糾正、預防和改進措施進行跟蹤和驗證;
* 編制內部審核計劃,組織內部審核人員按計劃要求進行審核,并對糾正措施實施效果進行跟蹤和驗證;
* 質量記錄的整理、歸檔;
* 監督檢查生產現場工作情況,履行質量保證工作的糾正與預防;
* 對不合格品的控制,處理偏差及質量投訴。
任職資格:
* 大學本科及以上學歷,生物等相關專業;
* 2年以上醫療器械質量保證工作經驗;
* 工作認真負責、善于發現和解決問題,具有較好的組織協調能力、溝通能力、抗壓能力以及團隊合作精神;
* 熟悉iso13485、生產實施細則等國家醫療器械相關法律法規者優先,具有iso13485內審員資格者優先。
第10篇 sqa供應商質量工程師崗位職責
資深供應商質量工程師 sqe sqa sqm summary
responsible to develop and maintain systems required to continuously improve the supplier base through systematic review and improvement. this, coupled with product review and enhancement to supplier processes, are designed to provide company with the best product available at a competitive price.
essential duties and responsibilities include the following. other duties may be assigned.
strong tooling knowledge required reviewing and making recommendations to tooling and gauging during product development for advance program.
be experienced in the commodity of electronics and electrical product quality control
strong analytical skills required to root cause and close issues related to the product
able to facilitate and take lead role in design reviews
direct, lead, and mentor all lower positions
maintain housekeeping standards
promote and practice safe work habits
conduct design reviews for advance programs
conduct supplier site reviews and analyzes supplier capability
conduct apqp / follow up of supplier during development / launch phase.
sqe will be responsible for the quality of components being shipped by supplier.
develop supplier team relationships to work in release of new programs as well as resolve current product issues
continuously improve supply base
evaluate and follow to closure ppap issues
must actively participate in achieving quality goals
capable of reviewing and diagnosing problems with product on the manufacturing floor
responsible to maintain the corrective action system
interface professionally with the customers and suppliers
iatf 16949 and iso 14001 responsibilities
the responsibilities listed in the system ts16949 quality manual and iso 14001 environmental manual pertaining to this position are mandatory. other responsibilities may be added, with or without notice in writing, at any time and it is the responsibility of this position to review such changes on a period basis.
education and/or experience
technical degree preferred
local region “quality certification preferred (example: aiag, vda……).
ten years minimum experience in quality with five years senior quality positions
required skills, knowledge and abilities
strong tooling knowledge required reviewing and making recommendations to tooling and gauging during product development for advance programs
strong analytical skills required to root cause and close issues related to the product
strong written and oral communication skills required
strong computer skills with micro-soft office
be professional in appearance and demeanor
thorough knowledge of manufacturing concepts and methods
strong written and oral communication skills required
must be familiar with iso 14001/ ts16949
intimate knowledge of ppap, fmea, spc, pso, apqp, and qsa summary
responsible to develop and maintain systems required to continuously improve the supplier base through systematic review and improvement. this, coupled with product review and enhancement to supplier processes, are designed to provide company with the best product available at a competitive price.
essential duties and responsibilities include the following. other duties may be assigned.
strong tooling knowledge required reviewing and making recommendations to tooling and gauging during product development for advance program.
be experienced in the commodity of electronics and electrical product quality control
strong analytical skills required to root cause and close issues related to the product
able to facilitate and take lead role in design reviews
direct, lead, and mentor all lower positions
maintain housekeeping standards
promote and practice safe work habits
conduct design reviews for advance programs
conduct supplier site reviews and analyzes supplier capability
conduct apqp / follow up of supplier during development / launch phase.
sqe will be responsible for the quality of components being shipped by supplier.
develop supplier team relationships to work in release of new programs as well as resolve current product issues
continuously improve supply base
evaluate and follow to closure ppap issues
must actively participate in achieving quality goals
capable of reviewing and diagnosing problems with product on the manufacturing floor
responsible to maintain the corrective action system
interface professionally with the customers and suppliers
iatf 16949 and iso 14001 responsibilities
the responsibilities listed in the system ts16949 quality manual and iso 14001 environmental manual pertaining to this position are mandatory. other responsibilities may be added, with or without notice in writing, at any time and it is the responsibility of this position to review such changes on a period basis.
education and/or experience
technical degree preferred
local region “quality certification preferred (example: aiag, vda……).
ten years minimum experience in quality with five years senior quality positions
required skills, knowledge and abilities
strong tooling knowledge required reviewing and making recommendations to tooling and gauging during product development for advance programs
strong analytical skills required to root cause and close issues related to the product
strong written and oral communication skills required
strong computer skills with micro-soft office
be professional in appearance and demeanor
thorough knowledge of manufacturing concepts and methods
strong written and oral communication skills required
must be familiar with iso 14001/ ts16949
intimate knowledge of ppap, fmea, spc, pso, apqp, and qsa
第11篇 品質qa工程師崗位職責
qa engineer品質工程師 position(職位): qa engineer品質工程師
supervisor(上級主管): qa manager
main responsibilities主要職責:
incoming/process/final inspection
來料/過程/成品檢驗
periodic process audit
定期過程審核
periodic internal audit
定期內審
conduct process capability study
執行過程能力分析
develop inspection wi
制定檢驗規范
collect & summarize quality data
收集并總結質量數據
initiate and track corrective actions
發起糾正措施、并跟蹤改善
involved in supplier management
供應商管理,包括供應商審核、來料表現跟蹤等;
other temporary work
指派的其他工作。
requirements要求:
college education in mechanical engineering or related fields required
大專文化程度(或以上),機械專業或相關工科專業
experience with qms :iatf16949 and iso9001: 015
有iatf16949 及 iso9001: 215的經驗
knowledge of the apqp,ppap, msa, spc, fmea processes.
熟識apqp,ppap, msa, spc, fmea過程
two yearsquality management service experience
兩年以上質量管理經驗;
english: cet4, can communicate with customers in english via e-mail and orally;
英語:大學英文四級,能與客戶用英文通過e-mail及口頭形式進行溝通;
computer: skillful at ”office” software operation;
電腦:熟練操作“office”各種軟件;
good communication skills
良好的溝通技巧;
position(職位): qa engineer品質工程師
supervisor(上級主管): qa manager
main responsibilities主要職責:
incoming/process/final inspection
來料/過程/成品檢驗
periodic process audit
定期過程審核
periodic internal audit
定期內審
conduct process capability study
執行過程能力分析
develop inspection wi
制定檢驗規范
collect & summarize quality data
收集并總結質量數據
initiate and track corrective actions
發起糾正措施、并跟蹤改善
involved in supplier management
供應商管理,包括供應商審核、來料表現跟蹤等;
other temporary work
指派的其他工作。
requirements要求:
college education in mechanical engineering or related fields required
大專文化程度(或以上),機械專業或相關工科專業
experience with qms :iatf16949 and iso9001: 015
有iatf16949 及 iso9001: 215的經驗
knowledge of the apqp,ppap, msa, spc, fmea processes.
熟識apqp,ppap, msa, spc, fmea過程
two yearsquality management service experience
兩年以上質量管理經驗;
english: cet4, can communicate with customers in english via e-mail and orally;
英語:大學英文四級,能與客戶用英文通過e-mail及口頭形式進行溝通;
computer: skillful at ”office” software operation;
電腦:熟練操作“office”各種軟件;
good communication skills
良好的溝通技巧;
第12篇 保證工程師qa崗位職責
qa engineer 質量保證工程師 庫爾茲壓燙科技(合肥)有限公司 庫爾茲壓燙科技(合肥)有限公司,庫爾茲壓燙 main tasks:
- complaint handling of bap products (mainly automotive)
- communication with customers and sales departments for technical issues (foil properties, process issues)
- internal communication with related departments (production, planning, customer service, etc.)
- quality assurance (qa): solving daily issues regarding optical and workability issues of bap products
responsibilities and task details:
- understanding the foil production process of bap products
- supporting and coordination of quality issues for bap products
- self-organization and using 5s disciplines in quality field
- evaluation of defect parts in the field of imd and insert molding
- implementing efficient work flows for the daily quality procedures
- communication with related departments about quality issues
- continues improvement of quality and process parameters
- discuss with colleagues in chinese and english language
qualification:
- need to communicate in english (write and speak)
- independent working attitude and communication
- engineer or scientific university degree (or background in qa / imd field)
- curiosity in learning and understanding new processes
